10mm x 15mm x 1.5mm
Categories: (Modules, Bluetooth/ZigBee/Thread/ANT, Embedded)

RENO AN

ANT embedded module with integrated antenna

  • Small footprint 10mm x 15mm x 1.5mm with onboard PCB antenna/MHF4 connector
  • ANT SDK supports all ANT features and offers a variety of network topologies, including peer-to-peer, star and tree
  • Supports UART, SPI as interfaces to host MCU
  • Easy to use AT commands set and Binary APIs to develop applications on host MCU
  • Global certifications – FCC, IC, CE

RENO AN is a highly integrated ultra-low power embedded certified module supporting ANT protocol and NFC-A tag. RENO interfaces to user’s MCU with UART and SPI. This small form-factor module reduces the system cost and gives design flexibility by including all the analog front-end, crystals and antenna.

RENO AN module is based on Nordic nRF52840 SoC. This module offloads the host processor and reduces user’s development cost and time to market with integrated wireless stacks, network stack, and application APIs and all the advanced security features supported by ARM Trust Zone Cryptocell-310. Module comes in industrial temperature.

Applications

  • Personal fitness devices
  • Wearables
  • Connected health
  • Smart home sensors
  • Asset trackers and Locationing devices
  • ANT SDK supports all ANT features and offers a variety of network topologies, including peer-to-peer, star and tree
  • Advanced burst data transfer modes (up to 60kbps)
  • Supports up to 15 logical channels each with configurable channel periods (5.2ms – 2s)
  • Enhanced ANT features:
    • Optional channel encryption mode (AES-128) Supports up to 8 public, private and/or managed networks
  • Support for the AT commands for easy evaluation and Binary APIs for production
  • Support for UART and SPI to interface with host MCU. AT commands support over UART and Binary APIs support over UART and SPI interfaces
  • Highlights of iVativ APIs and AT commands
    • Ready to use on all popular MCUs with zero or negligible porting effort
    • Seamless integration for RTOS or bare-metal based user application
    • Agnostic to underlying SoC. / Chipset and its respective SDKs / firmware
    • Secure boot enabled
    • OTA FW update support
Wireless Protocols ANT/ ANT+
Frequency 2.402 – 2.480 GHz
On air data rates 1Mbps
Security Features ARM Crypto Cell 310, 128-bit AES HW accelerator, Secure boot
Antenna options PCB Trace Antenna or MHF4 connector
Programmable output power -20dBm to +8dBm
Receive Sensitivity TBD
Current consumption
  • 450nA – Deep sleep mode
  • 1.5µA – System standby mode
  • Active – TBD
GPIO 46 configurable
Range ~30m
Power supply and operating voltage range Integrated DC-DC, 1.7v to 5.5v
Operating Temperature -40oC to 85oC
Humidity 5-90% non condensing
Topology Possible: peer-to-peer, star, tree, high node count, mesh
Package 10mm x 15mm x 1.5mm, 0.5mm pitch
Communication modes Broadcast, acknowledged, and burst data
Certifications and approvals FCC, IC, CE
Product Brief
168 KB
Quick Start Guide
284 KB
EVK User Guide
5 MB
Data Sheet
3 MB
  • RENO AN DVK
  • RENO AN EVK
  • 1 x Micro USB cable
  • 1 x Mini USB cable
  • NFC antenna
  • STM32F411 MCU board

-Fill the form and submit or drop an email at sales@ivativ.com

Part No Protocol Architecture Dimensions
(L x W x H) in mm		 Package Antenna Description
I540E00A-I2LT ANT + NFC Embedded 10 x 15 x 1.5 LGA PCB RENO ANT and NFC module with PCB Antenna, Tape and Reel packing Buy
I540E00A-I2LR ANT + NFC Embedded 10 x 15 x 1.5 LGA PCB RENO ANT and NFC module with PCB Antenna, Tape and Reel packing Buy
I540E00A-I3LT ANT + NFC Embedded 10 x 15 x 1.5 LGA MHF4 RENO ANT and NFC module with MHF4 Antenna connector, Tray packing Buy
I540E00A-I3LR ANT + NFC Embedded 10 x 15 x 1.5 LGA MHF4 RENO ANT and NFC module with MHF4 Antenna connector, Tape and Reel packing Buy

Product Enquiry