10mm x 15mm x 1.5mm
Categories: (Modules, Bluetooth/ZigBee/Thread/ANT, Embedded)

RENO ZB

ZigBee Embedded module with integrated antenna

  • Small footprint 10mm x 15mm x 1.5mm with onboard PCB antenna/MHF4 connector
  • ZigBee SDK with industry proven and certified ZBOSS 3.0 stack from DSR company supporting coordinator, router and end device roles
  • Supports UART, SPI as interfaces to host MCU
  • Easy to use AT commands set and Binary APIs to develop applications on host MCU
  • Global certifications – FCC, IC, CE

RENO ZB is a highly integrated ultra-low power embedded certified module supporting ZigBee and NFC-A tag. RENO interfaces to user’s MCU with UART and SPI. This small form-factor module reduces the system cost and gives design flexibility by including all the analog front-end, crystals and antenna.

RENO module is based on Nordic nRF52840 SoC. This module offloads the host processor and reduces user’s development cost and time to market with integrated wireless stacks, network stack, and application APIs and all the advanced security features supported by ARM Trust Zone Cryptocell-310. Module comes in industrial temperature.

Applications

  • Light switches, home energy monitors, traffic management systems, consumer and industrial equipment
  • Personal fitness devices
  • Wearables for wireless payments
  • Connected health
  • Smart home sensors and controllers
  • Industrial IoT sensors and controllers
  • Asset trackers and Locationing devices

Features

  • ZigBee SDK with industry proven ZBOSS 3.0 stack from DSR company
  • Secured by 128 bit symmetric encryption keys
  • Maximum number of child nodes – 32
  • Over the air device firmware upgrade (OTA DFU)
  • Support for the AT commands for easy evaluation and Binary APIs for production
  • Highlights of iVativ APIs and AT commands
    • Ready to use on all popular MCUs with zero or negligible porting effort
    • Seamless integration for RTOS or bare-metal based user application
    • Agnostic to underlying SoC. / Chipset and its respective SDKs / firmware
    • Secure boot enabled
    • OTA FW update support
  • Support for UART and SPI to interface with host MCU. AT commands support over UART and Binary APIs support over UART and SPI interfaces.
  • ARM® Crypto Cell 310 cryptographic accelerator  and AES 128 bit encryption
Wireless Protocols Zigbee
Frequency 2.402 – 2.480 GHz
On air data rates 802.15.4 –  250kbps
Zigbee Throughput 80kbps
Security Features ARM CryptoCell 310, 128-bit AES HW accelerator, Secure boot
Antenna options PCB Trace Antenna or MHF4 connector
Programmable output power -20dBm to +8dBm
Receive Sensitivity 802.15.4: -100dBm at 250kbps
Current consumption
  • 450nA – Deep sleep mode
  • 1.5µA – System standby mode
GPIO 46 configurable
Range 10 – 100 meters
Power supply and operating voltage range Integrated DC-DC, 1.7v to 5.5v
Temperature -40oC to 85oC
Humidity 5-90% non condensing
Package 10mm x 15mm x 1.5mm, 0.5mm pitch
ZigBee 3.0 ZBOSS PRO stack Supports coordinator, router, and end device roles
Certifications and approvals FCC, IC, CE
Product Brief
169 KB
Quick Start Guide
284 KB
EVK User Guide
5 MB
Data Sheet
2 MB
  • RENO ZB DVK
  • RENO ZB EVK
  • 1 x Micro USB cable
  • 1 x Mini USB cable
  • NFC antenna
  • STM32F411 MCU board

-Fill the form and submit or drop an email at sales@ivativ.com

Part No Protocol Architecture Dimensions
(L x W x H) in mm		 Package Antenna Description
I540E007-I2LT ZigBee + NFC Embedded 10 x 15 x 1.5 LGA PCB RENO ZigBee and NFC module with PCB Antenna, Tray packing Buy
I540E007-I2LR ZigBee + NFC Embedded 10 x 15 x 1.5 LGA PCB RENO ZigBee and NFC module with PCB Antenna, Tape and Reel packing Buy
I540E007-I2LR ZigBee + NFC Embedded 10 x 15 x 1.5 LGA MHF4 RENO ZigBee and NFC module with MHF4 Antenna connector, Tray packing Buy
I540E007-I3LR ZigBee + NFC Embedded 10 x 15 x 1.5 LGA MHF4 RENO ZigBee and NFC module with MHF4 Antenna connector, Tape and Reel packing Buy

Product Enquiry